Milli-RX Water Purification Systems

Milli-RX systems keep water quality continually high. The key is the deionization (DI) module which uses a small electric current to continually purify water that has been pretreated by reverse osmosis (RO). Milli-RX systems produce 20 to 75 liters of water per hour. The water meets or exceeds CAP, ASTM and NCCLS Type 2 quality specifications. In addition, the systems use just pennies worth of electricity to produce liters of product water. The Elix continuous deionization module will run for years before it needs to be replaced. That means, unlike stills, there's minimal monthly maintenance. To remove contaminants the Milli-RX system combines three technologies: pretreatment, reverse osmosis, and continuous deionization. Pretreatment is accomplished by the ROPAK pretreatment pack which removes free chlorine and particulate matter from the feed water. When one side of the pack is exhausted, you simply flip it over and plug it in (no tools required).

Millipore Corporation, 80 Ashby Road, Bedford, MA 01730. Tel: 1-800-MILLIPORE (645-5476); Fax: 800-645-5439.