The CS3080 Sample Recycler automatically separates partially resolved by recycling the sample back through the LC column to improve the separation
Chiralizer ServicesG SRC="https://vertassets.blob.core.windows.net/image/df7f48d2/df7f48d2-fb46-11d3-8c2c-009027de0829/cs3080.jpg">
The CS3080 Sample Recycler automatically separates partially resolved by recycling the sample back through the LC column to improve the separation. The recycler helps solve design problems which cause dilution and enables any chromatographer to take advantage of powerful recycle techniques.
The system consists of both a modular control box and a remote high pressure, low delay volume (0.1 microliter) valve. Designed to work with most any manufacturer's HPLC system, only a single HPLC pump, two identical columns, and one available time programmable contact closure are required to achieve excellent separations.
Improve resolution without developing a new method
Recycle samples as many times as needed until the desired resolution is obtained.
Suited for partially resolved chiral racemates.
Does not run the sample back through the pump head, which can dilute the sample, but rather passes it onto one of two identical columns in a "leap frog" manner.
The detector can be placed after each successive column outlet to monitor the progress of the separation, without disturbing the run. This allows real time monitoring of the sample not available with any other system on the market.
<%=company%>, 12 Penns Trail, Suite 131, Newtown, PA 18940. Tel: 215-497-9493. Fax: 215-497-9466.