Corrosion Cell Kit

The Corrosion Cell Kit (CCK) features a design based on a standard glass reaction flask. The cell top has four 24/40 standard taper holes three of which are equipped with Teflon tubing adapters. Components were selected highest chemical inertia. In normal use the only materials coming in contact with the test solution are glass and TFE (teflon). The cell is therefore usable with a wide variety of test solutions, including nonaqueous media.

The cell is normally used to run electrochemical tests on standard cylindrical metal specimens. It can also be customized for use with other sample types. The kit is equipped with two C1018 mild steel samples. A commercial source of suitable cylindrical specimens is the P/N 410 series from Metal Samples Company. They have cylindrical samples available in several hundred different metals.

Gamry Instruments, 734 Louis Drive, Warminster, PA 18974. Tel: 215-682-9330; Fax: 215-682-9331.