Precise Basic Glove Boxes

Precise Basic Glove Boxes are designed to provide a leak-tight physical barrier between the user and the materials inside the glove box. These simple, economical boxes are designed to allow the user to customize them with accessories to meet specific applications.

Features

• One-piece molded, medium-density polyethylene shell.
• Dry powder epoxy-coated steel superstructure
• 1/4" thick laminated safety glass viewing window, 26.4" wide x 12.5" high, removable for loading equipment, with powder-coated steel frame and neoprene gasket
• Space-saving inner and outer transfer chamber doors that pivot upward, are counterbalanced and equipped with quick-latches
• Black, chemical-resistant work surface sealed to the glove box floor
• Interior ceiling-mounted electrical duplex receptacle with 5 amp maximum circuit load
• Neoprene gloves, size 9 3/4, are included.
• Fluorescent lamp, 22 watts, with easy replacement from the top
• Switches for light and innermost interior electrical receptacle
• Approximately 13 cubic feet of interior space in main chamber
• 11.0" nominal ID x 12.0" long transfer chamber
• Factory leak tested with a mass spectrometer while glove box is pressurized with helium at 5 inches of water gauge
• No detectable leaks greater than 1 x 10(-4) ml/sec
• Meet Class 1 atmosphere containment conditions for oxygen leak rates per ISO 10648-2 test method
• Transfer chamber interior interlocking shelf of dry powder epoxy-coated steel
• ETL listed (115 volt models)
• CE Conformity (230 volt models)