Product/Service

Large Capacity Reach-In Incubators/Stability Chambers

Source: United Laboratory Plastics
White aluminum walls and ceiling, stainless steel floor
0°C to +50°C And +5°C. Above Ambient to + 60°C.

Standard Options:

  • Back wall plenum assures positive air flow throughout entire chamber for best temperature control and uniformity
  • Relative humidity control with vapor injection system and or dehumidifier
  • Programable temperature cycles-rs485 communications
  • Chart recorders
  • Electrical outlets-access ports
  • Microprocessor Based Temperature and Humidity Controls
  • Dual Digital Display Of Setpoint and Readout In 0.1ยบ C. and 0.1 % RH Increments
  • Controls feature PID with Autotune for Straight Line Temperature Control
  • High/Low Temperature Safety Alarms Direct Set Digitally

    Other Features Include:

    Single-Double -Triple Door Models: 26 TO 72 Cubic Feet
    Interior: White aluminum walls and ceiling, stainless steel floor
    Exterior: Chemical resistant white vinyl
    Insulation: 2" thick foamed-in-place urethane
    Refrigeration: CFC FREE
    Doors: Full view triple pane tempered safety glass. Three panes of glass, has twice the insulation value with the glass staying clear without door heaters. Self closing doors
    Lighting: Switch controlled, safety shielded fluorescent lights
    Shelves: Rust free anodized aluminum with reinforced stainless steel bars. Adjustable in 1/2" increments.

    Please see our online catalog for models and pricing information.

    United Laboratory Plastics, P.O. Box 8585, Saint Louis, MO 63126. Tel: 636-343-2202; Fax: 636-343-6676.